Single Number Reach - aka SNR in 5 minutes

SNR - single number reach in 5 minutes

1. Config End-user hquser3, choose "Enable Mobility" and associate user with device (phone3)
2. On Menu device/device setting/softkey template, copy standard user template to Mobile user template. Click on "configure softkey layout" link. Add Mobility softkey to on-hook and connected states.
3. Config hqphone3 with Mobility softkey-template, and turn "Device Mobility Mode" ON
4. Add new device/device setting/remote destination profile - ex: hquser3.
        - userid = hquser3
        - DP = DP-HQ
        - CSS = CSS-global
5. Add new DN 1003 on remote destination profile ,
        - PT = PT-USA  (same PT as hqphone3/Line1)
    then save
6. Add Associated Remote Destinations
        - check both Mobile Phone & Enable Mobile Connect
        - destination number = 918005553333
7. Make sure Association Information - Line Association BOX is checked
8. Test by dial 1003, external phone 18005553333 should ring. Otherwise, reset  hqphone3 and recheck config